Considering they are technical devices, Netgear wireless range extenders get the reason to act out and cause issues. In the 21
st century, the most faced issue that users are stuck with is the Netgear extender not working well. In case you are also trying to make your device work well, but are not able to, then it might be because of more than one reason. Are you unable to access the
mywifiext.net address due to this issue?
Is it also stopping you from managing the device remotely? Well, in that case, you ought to make your way to the solutions or troubleshooting techniques given below to help yourself get your Netgear range extender up and back on track.
[Fixed] Netgear Extender Not Working Well Issue
1. Check the Extender-Router Distance
Have you ever thought about the first reason that could have caused the Netgear extender not working well issue? No? Well, it might be the improper distance between the range extender and the host router. In case you do not believe in this, check for confirmation. Have you received enough? Well then, bring the networking devices closer. For this, a little unplugging and a little re-plugging are required from your end.
2. Repair the Cable Using a Cello Tape
Another reason why you are here is that your networking devices are connected via a damaged Ethernet cable. Two things can be done from your side in this case. The first thing requires you to make the cable well enough to use by taping it up using tape and the second thing demands you to buy a new cable. We would personally suggest you use the first option as the second one will require you to step out of your house.
3. Relocate the Transmitting Appliances
In case transmitting appliances are kept near the Netgear wireless range extender, then you should not waste any more time in relocating it as the signals are getting interrupted because of them. Apart from keeping the extender away from smart home appliances, ensure that it is not located near metal objects as well as electronic devices. You might not understand the importance of this tip now, but you surely will later on.
4. Power Cycle the WiFi Range Extender
Sometimes, all that a networking device needs to work well is rest. And this rest can be given to the extender by rebooting it. Doing so will give it enough time to take a quick nap and help you to get rid of the issue in debate. In case you are not aware of the actual process to reboot your device, then you ought to refer to the instructions which are given in the user manual. You will also find the steps to learn
how to reset Netgear extender here.
5. Drop the Idea of a Wireless Medium
In case you have put the wireless source of connection to use for joining the devices, then you committed a mistake as it is not a reliable source of connection. You should put an end to this. The only way that this can be done is if you use any other source of connection. To explain this thing to you in non-technical terms, you ought to use a cable for this purpose. Clean the ports before clicking the cable in place.
The Bottom Line
As mentioned above, being technical devices gives the Netgear range extender the benefit of acting out irrationally. Considering your networking device is refusing to work for you because of this reason, we are expecting that the tips mentioned above will help you out. In case you still have your knickers in a twist; your last resort is to restore your device to its original mode or the default factory values.
As soon as you have completed the reset process, feel free to go through the steps given in the manual of your device and consider configuring it again. Make sure that you read the guidelines in the same order as they are printed.
By Admin
