It’s time for you to put in a new refrigerator! The old one stopped chilling your food the way that it should.
Since you’re always buying groceries for a lot of people, you would like a fridge that can handle the demand. The question is if you can fit a larger appliance in your kitchen.
It’s time for you to get out a measuring tape. You’ve got to measure the width, length, and depth of your current appliance to find out what you can fit in your kitchen.
We’ve got a refrigerator size guide that will walk you through the entire process. Keep reading to learn more.
What Is the Standard Refrigerator Size?
The average size of a fridge is greatly determined by what kind it is. A fridge with a large bottom freezer is going to be a completely different size than a French door one with refrigerator water filters.
On average, however, a full size refrigerator is usually 39 3/4 inches wide and 71 1/4 inches tall. Again, these are simply the average numbers. You’ll still. need to get out your measuring tape.
Measuring Width
First up is the refrigerator’s width. You’re going to measure from the wall to the cabinet on either side of your current refrigerator’s space.
Leave a few inches between the wall and hinge of your fridge door. If you don’t, you’ll find it difficult to open your appliance to put your groceries away.
Measuring Length
French door fridges are usually much taller than the other types of refrigerators on the market. If you want one of them, you’ll have to account for about 70 inches.
You can measure how much height you have to work with if you have above-floor cabinets. All you have to do is measure the space between the floor and the bottom of your cabinets.
Measuring Depth
You only need your measuring tape for one more thing. You’ve got to determine your refrigerator’s depth. There are two ways to go about this. You can measure standard depth and counter depth.
If you’re doing counter depth, you’ll place your measuring tape against the wall and drag it out to the edge of your cabinets. If you’re going with standard depth, you’ll go a little past the edge of your counter.
Make the Necessary Adjustments
Now that you have all your measurements written down, you’re going to need to make a few adjustments. Add about 1/2 an inch around all sides of the fridge.
Doing so will allow for ventilation, which will prevent your fridge from getting too hot. It allows the appliance to use up less power in the long run.
The Only Refrigerator Size Guide You’ll Ever Need
Do you want a fridge that’s a little larger than your current one? You’re going to need to measure out how much extra space you have to work with Learn More