Metal detectors are a great way to find artifacts from the past and enjoy outdoor activities. But, if you want your device to work well for years, there are some things that you need to do. Today we’ll give you tips on how to maintain your equipment so that it continues working the way it should and helps you find more gems! Metal detecting finds will no longer be hard to do.
So, without further waiting, let’s start!
7 Tips to Maintain your Metal Detector:
Store in a cool and dry place:
If you live in a place that is humid, the metal detector will corrode faster. Humidity can also cause problems with electrical circuitry and sensors. Since the coils are exposed metal waiting to get spoiled, staying away from moisture is your best bet. Elevated temperatures can also mess with the detection mechanism, rendering it useless.
Keeping the equipment clean:
Since detectors pick up all kinds of metals, you need to make sure they stay clean. Otherwise, the dirt can prevent the machine from working properly. Just be careful where you use your detector so as not to damage it! Cleaning is easy: just spray away with water and wipe dry with a rag. There are also special cleaner sprays that can be bought at any good hardware store. Just remember to wipe off any residual water as it can corrode the metal.
Protect the coil:
The coils are the most delicate part of your metal detector, so you have to protect them from being damaged by rocks and other sharp objects while exploring rocky terrain. This will not only help prolong its life, but it’ll allow for better performance as well. Getting your detector and its accessories from a trusted metal detector store like Teknetics Direct can save you a pretty penny.
Use lubricants:
One of the most important things to do when using your metal detector is to lubricate it. This will remove any grime and dirt, prevent rusting, and make sure everything works properly in the long run. You can use oils or petroleum jelly for this purpose but take note that these are not substitutes for proper care!
Next up is protecting the battery.
Cover your batteries with a rubber cover:
After removing the battery from your detector, make sure to cover it with a rubber casing. This will prevent it from corroding and even help prolong its life! It is also good practice to remove the batteries when not in use as this prevents them from draining power too quickly. Another way of increasing their lifespan is to make sure they are kept between 20% to 80% state of charge. The batteries will degrade slower this way.
Protect your detector from chemicals:
To prevent damage from chemicals, you have to take off your coil and cover it with a protective bag. This is because some of these substances can cause corrosion that can be very hard to clean. If there’s a chemical spill during an outdoor activity, make sure not to use water as this will do more harm than good! Try cleaning it off with a dry cloth. Making this a practice will keep your detector in pristine condition and will improve your metal detecting finds.
There is no such thing as too much care:
People tend to believe they will ruin their equipment if they take too much care of it. This is just a myth standing in your way. We all value our investments and there is nothing wrong with obsessing a little over keeping them top-notch.
So, there you have it: these are our tips on how to maintain your equipment so that it continues working properly and you can enjoy more metal detecting finds! Go out, explore and you may stumble upon something life-changing!
For further questions, visit the FAQs section below:
FAQs:
How can I make my equipment last longer?
Take good care of it. This means cleaning, lubrication, and protection from chemicals to prevent corrosion. If you’re not sure how to do this properly, ask a trusted metal detector store for advice!
How can I prolong my battery life?
Take them out when you’re not using them and try storing them in a dry place with moderate temperature. Do not overcharge them.
How can I protect my coil from getting damaged?
If you’re going to use your metal detector near rocky places, change coils if they get scratched or broken, and then cover them with protective cases! Change scuff covers regularly as well so that dirt doesn’t accumulate.
click here for more articles