One of the best aspects of owning your own car is the ability to purchase from speakers. This will ensure that you create the best experience possible while you are on the road. However, not everybody understands everything they should when it comes to replacing old speakers and buying new speakers.
Making the right decision is easier than you think, though. Let’s explore what you should keep in mind when it comes to buying stereo speakers for your vehicle.
1. Determine the Type of Speaker You Need
In general, you will need to choose between component speakers or full-range speakers. Due to the design of component speakers, these typically offer the best quality. On the other hand, full-range speakers are much simpler to install.
This is due to the fact that they are consolidated within a single speaker system. As the name suggests, they are also capable of handling a full range of sounds.
2. Speaker Sensitivity
Interestingly, many people overlook the importance of speaker sensitivity when looking for a stereo speaker provider.
However, it’s one of the most crucial elements to consider about car stereo speaker systems. For those who are unfamiliar, low-powered stereo systems are best for high-sensitivity speakers.
In contrast, stereo systems that are high-powered are able to handle low-sensitivity range speakers. You should also keep in mind that the majority of factory car stereo systems are considered to be low-powered. In general, the only cars with high-powered stereo systems are those that have had third-party stereos installed.
So, this can help you make your decision.
3. Don’t Forget About Sound Quality
When looking for speakers, you can’t neglect sound quality. After all, this is likely the reason you are upgrading your system in the first place.
When it comes to sound quality, you’ll want to find a system that emphasizes the segments of the frequency range that you desire. So, you’ll want a system that focuses on the lower end of the spectrum if you want the bass of your speakers to sound full and strong.
Looking for speakers that have the strongest bass possible? You can check out this resource by American Bass to learn more.
4. Power Management
Regardless of the other details of your stereo system, proper power management is essential.
Otherwise, you will not be able to use your speakers effectively. They might not produce the results that you expect, and they may even cause electrical issues within your vehicle. To clarify, speakers that draw too much power and are improperly wired could cause problems with your car battery.
Under the right circumstances, you could even find yourself stranded as a result. As a general rule of thumb, stronger speakers will need more comprehensive power handling.
5. Materials of the Speaker Build
A proper speaker build has three primary components. These include the speaker surround, the woofer, and the tweeter. The speaker surround is the casing around the other components.
Its primary purpose is to protect against heat and humidity. Although the preferred material for this component is rubber, it’s possible to accomplish the same task using foam or cloth.
The tweeter emphasizes the higher frequencies and tones within the speaker. As such, they are typically created from silk, textiles, or polyurethane. The hardness of the tweeter plays a large role in the type of sound you get from it.
Softer tweeters produce warm tones, while harder tweeters produce sharper, higher tones. Finally, the woofer is responsible for producing bass sounds. Polypropylene is the most commonly used material due to its capability of creating accurate bass sounds.
However, it’s also possible to use woven fabrics. Although these don’t produce top-tier bass, they are often less expensive.
6. Two-Way or Three-Way Speakers
For those who wish to achieve the fullest sound possible, a three-way speaker is recommended.
This is due to the fact that it has components for lower frequencies, high-frequency, and mid frequencies. A two-way speaker, on the other hand, does not have a component to emphasize the midrange. Although you can still produce quality sound with two-way speakers, it will never sound as full or wide.
Depending on your needs, this may or may not be an issue. For instance, someone who frequently drives alone and wishes to improve their stereo system over the stock components would be fine choosing a two-way speaker. Someone who wishes to create the best experience possible for everyone who hears their car speakers would need a three-way speaker system.
7. Price
Speakers often don’t come cheap. More specifically, you typically get what you pay for.
If you are on a limited budget, you will likely need to choose the lower-tier options that are available to you when comparing speaker costs. The good news, however, is that these are still superior compared to stock car speakers.
If you are willing to splurge a bit more, you can drastically increase the quality of the experience you have. Regardless, be sure to research the type of speakers you want so that you can determine whether or not they fall within your budget.
Buying Stereo Speakers Can Seem Complicated at First
With the above information in mind, though, it’s not nearly as difficult as you may anticipate. Be sure that you take this into consideration when buying stereo speakers so that you can make the decision that’s best for you.
Looking for more tips that can help you out later on? Check out the rest of our blog for plenty of more useful information.