Are you not able to access the Netgear orbilogin.net web page? If the answer to the question is yes, then know that you are in some serious trouble.
How? Well, if you want to change the password of your WiFi device or do anything else with its settings, accessing orbilogin.net is pretty important. And if that’s exactly what you aren’t able to do, then you now know why I said what I said.
But, worry not. I can help you resolve this issue. Simply go through the troubleshooting tips mentioned below and know how to fix the orbilogin.net not working issue.
Resolved: Netgear Orbilogin.net Not Working Issue
- Configure the Hardware Properly
To troubleshoot the orbilogin.net not working issue, start by checking the hardware. Have you configured the hardware of your Netgear device properly? Is the wall socket working properly? Are you using a damage-free power cable?
If the answer to any of these questions is NO, then consider the following points:
- First of all, make sure that the power LED light on your device is solid green.
- The wall socket that you’re using shouldn’t be damaged.
- The power cable that’s connecting your device to the socket shouldn’t be worn out.
- Use an Ethernet Cable to Connect Devices
One of the topmost reasons why you’re facing the orbilogin.net not working issue might be because of a weak internet connection. Thus, make sure that your Netgear Orbi device has access to a blazing-fast internet connection.
To ensure that, connect the Orbi router with the existing modem properly. If you have been connecting both your devices wirelessly so far, make use of an Ethernet cable now https aka ms remoteconnect.
- Change the Web Browser You’re Using
If you have been using an outdated web browser, then there, you’ve found another reason why the Netgear orbilogin.net not working issue is troubling you. But, fret not. To fix this issue, all you need to do is, update the web browser that you’re using.
If updating the web browser doesn’t work in your favor, then try to log into your Netgear Orbi device through incognito mode. Still no luck? Well, in that case, it is recommended that you switch to another web browser.
- Make Use of the Default IP Address
Is your web browser still stopping you from accessing the orbilogin.net administrative page? Try using the default IP address to log into your WiFi device then.
Now, for those of you who are wondering what might be the default IP address of your Netgear Orbi router, refer to the manual that came along with your device. You’ll find every little detail regarding your device in that manual.
- Update the Firmware of the Orbi
Sometimes, an outdated firmware can also stop you from accessing the orbilogin.net web page. Therefore, make sure that you update the firmware of your WiFi device before you try to access the web user interface of your device.
To update the firmware of your device, you simply need to perform orbilogin, go to the Settings option, and click on the Firmware Update option. In case you get stuck while updating your device, feel free to get in touch with me via the comments section below.
- Perform Factory Default Reset
Before getting in touch with me, if you want to give another try to resolving the issue on your own, then perform Netgear Orbi factory reset.
- Look for the Reset button at the bottom of your WiFi device.
- Once found, take an oil pin or paper clip and press the button.
- Hold the button for a couple of seconds, then release it.
- Within some time, your device will get restored to its default mode.
Caution: Resetting your Netgear Orbi device will restore it to its factory default settings. In simple words, whatever changed you’ve made to your device till date will get erased.
